  |
Back Plug Adapter
This adapter will
plug into the antenna port on the UPPER BACK portion
of your phone. A rubber or plastic plug may need to be
removed. Press firmly to ensure a good connection -
sometimes slight twisting is necessary. Using too much force
could damage your phone. |
  |
Bottom Plug
Adapter
This
adapter will plug into the BOTTOM of your cell phone.
Push until you hear a click. Press button(s) in middle or on
sides to release the adapter from the phone.
|
  |
Ring Adapter
This
adapter slides onto your cellular phone's existing built in
antenna. Press down firmly to ensure a good connection.
Be sure to lower your phone's built in antenna if applicable.
This adapter does not use a physical connection. Effectiveness
of this adapter varies from phone to phone and provider's signal
strength. This adapter couples with the internal antenna located
at the back of compact cell phones. |
  |
Coupling Adapter
This adapter will
slide onto the TOP BACK of your cell phone. The sleeve
may fit upside down but it may not function properly. This
adapter does not use a physical connection. Effectiveness of
this adapter varies from phone to phone and provider's signal
strength. This adapter couples with the internal antenna located
at the back of the compact cell phones. |
  |
Top Plug Adapter
Plugs into the
adapter port on the TOP of your phone. A rubber
plug may need to be removed. Press firmly to ensure a good
connection - do not twist. Using too much force could
damage your phone. A small number of top plug phones
require the removal of the original antenna to expose the port. |
  |
Top Plug w/Ring
This adapter has
a ring that slides over your existing antenna, while it plugs
into the antenna port on the TOP of your phone.
A rubber plug may need to be removed. Press firmly to
ensure a good connection - sometimes slight twisting is
necessary. Using too much force could damage your phone. |
 |
Top Replacement
Adapter
This adapter
comes in 3 parts. (A) A replacement antenna mount
base,
(B) An antenna cable, and (C) A replacement
antenna. You will first need to take a safety pin and place it
inside the hole on the existing antenna mount base while
forcefully pulling out the original antenna.
Remove the existing antenna mount base and replace it with the
new antenna mount base, making sure the gold pins are facing the
phone. You will need the replacement antenna after disconnecting
your antenna adapter. You can interchange the antenna cable and
the replacement antenna as needed onto the new antenna mount
base. |
  |
Top Screw Adapter
This antenna
adapter replaces your cellular phone's original antenna.
Unscrew your original antenna and screw in the antenna adapter.
Be sure to save your original antenna - you will need to use it
after disconnecting your antenna adapter. |
  |
Side Plug Adapter
Plugs into the
adapter port on the UPPER SIDE of your phone. A
rubber plug may need to be removed. Press firmly to ensure
a good connection - sometimes slight twisting is necessary.
Using too much force could damage your phone. |
  |
Clamp w/Back Plug
Adapter
This adapter has
a clamp that attaches onto your existing antenna, while the
contact pin connects into the antenna port on the back of the
phone. A rubber or plastic plug may need to be removed. |
  |
Universal Patch
Coupling Adapter
This adapter
couples with the internal antenna located at the back of compact
cell phones. This patch mount comes with Velcro tape that
adheres to the back of cell phones. The adapter then
attaches to your cell phone when you want to connect either to
an antenna or one of our cell phone booster amplifiers. This
adapter does not use a physical connection. Effectiveness of
this adapter varies from phone to phone and provider's signal
strength. |
